|
|
Muby Chemicals and a few more manufacturing units are
in Mubychem Group, the pioneer manufacturer of
Zinc Chloride, Potassium Chloride,
Sodium Acetate, Sodium Thiosulphate, Ammonium Chloride, Calcium Chloride, & Pharmaceutical Chemicals
in
|
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
Calc. Chloride BP IP
Calcium Chloride USP Calcium Chloride FCC Calcium Chloride Food Grade
Calcium Chloride MSDS
Calci. Chloride ACS AR LR
Calci. Chloride Anhydrous Fused
Calcium Chloride Dihydrate Hexahydrate
Calcium Chloride USP; Calcium Chloride FCC; Calcium Chloride Food Grade
Calcium Chloride USP
Calcium chloride, dihydrate.
CaCl2·2H2O 147.01
Assay— Calcium Chloride contains an amount of CaCl2 equivalent to not less than 99.0 percent and not more than 107.0 percent of CaCl2·2H2O.
Packaging and storage— Preserve in tight containers.
Labeling— Where Calcium Chloride is intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 10) responds to the tests for Calcium and for Chloride
pH: between 4.5 and 9.2, in a solution (1 in 20).
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 1 4g per g.
Iron, aluminum, and phosphate— To a solution (1 in 20) add 2 drops of 3 N hydrochloric acid and 1 drop of phenolphthalein TS. Then add ammonium chloride–ammonium hydroxide TS, drop wise, until the solution is faintly pink, add 2 drops in excess, and heat the liquid to boiling: no turbidity or precipitate is produced.
Heavy metals— the limit is 0.001%.
Limit of magnesium and alkali salts— Dissolve 1 g in about 50 mL of water, add 500 mg of ammonium chloride, and proceed as directed in the test for Limit of magnesium and alkali salts under Calcium Carbonate, beginning with “heat the solution, and boil for 1 minute”: the weight of the residue does not exceed 5 mg (1.0%).
Organic volatile impurities meets the requirements.
Calcium Chloride Injection as per USP Specifications
Calcium Chloride
Calcium Chloride Injection is a sterile solution of Calcium Chloride in Water for Injection. It contains not less than 95.0 percent and not more than 105.0 percent of the labeled amount of CaCl2·2H2O.
Packaging and storage— Preserve in single-dose containers, preferably of Type I glass.
Identification— It responds to the tests for Calcium and Chloride.
Bacterial end toxins— It contains not more than 0.2 USP End toxin Unit per mg of calcium chloride.
pH: between 5.5 and 7.5 in the undiluted Injection, except where the concentration is greater than 1 in 20, in which case this range applies to the Injection diluted with water to yield a concentration of 1 in 20.
Particulate matter: meets the requirements for small-volume injections.
Other requirements— It meets the requirements under Injections 1.
Calcium Chloride FCC US Food Chemical Codex
CaCl2 Formula wt, anhydrous 110.98
CaCl2·2H2O Formula wt, dihydrate 147.01
Calcium Chloride
DESCRIPTION
Calcium Chloride occurs as white, hard fragments, granules, or powder. It is anhydrous or contains two molecules of water of hydration. It is deliquescent. It is soluble in water and
slightly soluble in alcohol. The pH of a 1:20 aqueous solution is between 4.5 and 11.0.
Function Firming agent.
REQUIREMENTS
Labeling Indicate whether it is anhydrous or the dihydrate.
Identification A 1:10 aqueous solution gives positive tests for Calcium and for Chloride,
Assay Anhydrous: Not less than 93.0% and not more than 100.5% of CaCl2; Dihydrate: Not less than 99.0% and not more than 107.0% of CaCl2·2H2O.
Acid-Insoluble Matter Anhydrous: Not more than 0.02%; no particles per kilogram of sample greater than 2 mm in any dimension.
Arsenic Not more than 3 mg/kg.
Fluoride Not more than 0.004%.
Lead Not more than 5 mg/kg.
Magnesium and Alkali Salts Anhydrous: Not more than 5.0%; Dihydrate:: Not more than 4.0%.
Calcium Chloride Solution FCC; US Food Chemical Codex
Calcium Chloride
DESCRIPTION
Calcium Chloride Solution occurs as a clear to slightly turbid, colorless or slightly colored liquid at room temperature. It is normally available in a concentration range of about 35% to 45% of CaCl2.
Function Sequestrant; firming agent.
REQUIREMENTS
Identification When diluted to a concentration of about 1:10 (CaCl2 basis), a sample gives positive tests for Calcium and for Chloride.
Assay Not less than 90.0% and not more than 110.0%, by weight, of the labeled amount of calcium chloride, expressed as CaCl2.
Alkalinity [as Ca(OH)2] Not more than 0.3%.
Fluoride Not more than 0.004%, calculated on the amount of CaCl2 as determined in the Assay.
Lead Not more than 4 mg/kg, calculated on the amount of CaCl2 as determined in the Assay.
Magnesium and Alkali Salts Not more than 5.0%, calculated on the amount of Calcium Chloride as determined in the Assay.
Calcium Chloride USP Manufacturers: MUBY CHEMICALS
Cell Call to
Anmol: +91-9821870100 or Ambrish:
+91-9821570100
Copyright
and Usual Disclaimer
is Applicable.
Pharmaceuticals & Food Grade, IP BP USP FCC ACS
Gr. of Chemicals mfd. by Anmol Chemicals
Zinc Chloride
Potassium Chloride
Sodium Acetate
The
Trouble with the Rat Race is
Even if you Win you are
still a Rat
Calcium Chloride FCC Manufacturers;
Calcium Chloride Food Grade Manufacturers;
S-8,
TEL: (OFFICE) 91-22-23770100,
23774610, 23726950, 23723564. FAX: 91-22-23728264.
E-mail:
info@mubychem.com
Last
updated:
08 July, 2011.
Sodium Citrate
Titanium Dioxide
Zinc Carbonate